Skip to main content
Woodworking Machinery BrettwoodAbout Us Brettwood Machinery WorksContact Us at Brettwood MachineryStore Tour of Brettwood Machinery WorksLocation of Brettwood MachineryLeasingVideosLinks of InterestTips & TricksPolicies of Brettwood MachineryShipping
ME 35T Automatic Edgebander (ME 35T)
Reg. Price:
Sale Price:
add to cart

ME 35T Automatic Edgebander with Pre-Milling Function:

Main Features:

  • Pre-milling function with 2 diamond cutters allows a very good panel finish and linearity during pre-machining. Removable thickness is 0.5mm to 2mm.
  • Trimming unit uses the same High frequency motors found in larger SCM edgebanders offer less vibration and more reliability and precision. The radius part of the cutter is used to trim 2mm edges. And chamfered thin edges. The straight part is used for trimming wood edges up to 5mm thickness.
  • End cutting unit includes radius function. The flat part of the blade will cut thin tape while the curved part will perform the radius function.
  • Glue scraping unit: eliminates any excess of glue in the joint between the panel and the edge, improving the panel cleaning.
  • Brushing unit: 2 independent motors to perform the cleaning and polishing action.
  • Multiple high-frequency motors used throughout this edgebander to reduce vibration and provide the highest quality finish at all times.
  • Automatic lowering of the glue pot temperature after a temporary non-use of the machine.
  • Automatic edge loading system for rolled edges with shear device for 3mm max. thickness edges and 50mm height
  • 7 meters/min feed speed
  • Electrical requirements: 230v, single phase, 34 amps
  • Machine weight: 1347 lbs
  • Required footprint: 57” x 131”
  • Made in Italy

Technical Specifications:

  • Worktable dimensions: 3000 mm x 525 mm
  • Worktable height: 904 mm
  • Thickness of rolled edges: 0,4 mm/3
  • Thickness of edges in strips: up to 5 mm
  • Min. / max. panel height: 8 mm/50 mm
  • Min. panel length/width with rolled edges: 190 mm/110 mm
  • Min. panel length cut only on the front: 120 mm
  • Feed speed: 7m/min
  • Feed motor power S1: 0.55 kW
  • Pneumatic operating pressure: 6.5 bar
  • Exhaust outlet diameter (glue pot): 60 mm
  • No. 2 exhaust outlets diameter (trimming unit): 60 mm
  • No. 2 exhaust outlets diameter (pre-milling unit): 80 mm
  • Operating temperature: 20/190 °C
add to cart
    Site Mailing List 

    Brettwood Machinery Works Ltd.
    15138 Hwy 62 N
    Madoc, Ontario, Canada
    K0K 2K0
    Phone: 1-800-799-2199

    Design Your Own Website, Today!
    iBuilt Design Software
    Give it a try for Free