Lease me!

Nova SI X Sliding Table Saw:

Finally available within everyone’s reach!  With powered and programmed sawblade movement available as standard.  Circular saw with ±46° double tilting.  It allows simultaneous use of a 400 mm saw blade and 160 mm scoring blade both for 90° cutting and ±46° tilted cutting, guaranteeing the maximum cutting height on veneered panels and solid wood. 

Advantages

Unrivaled cutting finishing Sliding Table: Optimal support also to larger pieces, with the new sliding table 360 mm wide.  Exceptional precision and smoothness: to secure the guides it is not used glue, since the thickness could affect sliding.  They are secured with a procedure of aluminum riveting. 

Double tilting at everybody's reach saw unit: New saw unit with a stiff cast-iron structure which can accommodate a blade of 400 mm diameter with scoring blade mounted.  It ensure a perfect and easy cutting of veneer panels and thick solid wood material with very high thickness both at 90° and tilted cuts at ±46°.  The saw blade uses 100% of the motor power, thanks to the scoring blade with an independent motor as standard. 

READY: the practical advantage for automatic control of the main positions: The programming of the work becomes simple and effective with the electronic control with a 4” LCD colour screen. 

Ready 3 / Ready 3 UP Automatic positioning of the parallel fence, from “Ready” control (3 axes): Programmed or manual fence movement with a hold-down drive for the maximum versatility.  In addition the Ready 3 UP version has the control on the mobile control panel. 

Main Features:

• Max. saw blade diameter with mounted scorer: 400 mm
• Maximum saw blade projection from table to 90°/+46°/-46°: 136/97/60 mm
• Cutting width on rip fence: 1270 mm
• Squaring capacity: 2600 ÷ 3200 x 3200 mm
• Three-phase motors starting from: 7 (8) / 50 (60) kW/Hz
• Electronic control on LCD display:
  • Blades unit lifting and tilting
  • Tools date setting with automatic height adjustment with respect to the tilting
  • 3 separate modes: manual, semi-automatic and automatic with memory capacity up to 99 programs for cut lists
  • Calculator and hour counter
  • Ready 3 Up option included
• Cast iron saw unit with lifting system by means of cylindrical bars and tilting on high rigidity sliding side trunnions
• Scoring blade with independent motor
• Quick release removable parallel fence
• Anodized aluminum carriage sliding on hardened steel guide
• Squaring frame (1200 mm x 650 mm) includes telescopic fence, 2 flip over stops with digital readouts, eccentric clamp, swing arm support and idle roller for easy loading
• 2 blade speeds 3500 or 5000 rpm
• Additional products:
  • Max squaring stroke: 3200 mm
  • Angular cutting device with two flip-over stops and telescopic fence
• Electrical requirements: 600 volt, 3 phase
• Machine weight: 2,200 lbs
• Required footprint: 283”x 190”
• Made in Italy

Technical Features:

• Cast-iron saw worktable diam.: 1000 x 685 mm
• Blades tilting: -46° ÷ +46°
• Max. saw blade Ø with scoring blade installed: 400 mm
• Max. saw blade projection from table at 90°/45°: 136/97/60 mm
• Scoring blade diameter: 160 mm
• Max. squaring stroke (standard): 2600 mm
• Cutting width on parallel fence: 1270 mm
• Three-phase motors: 7kW (9,4hp) 50Hz – 8kW (11hp) 60Hz
• Phase motor (scorer) S1: 0,74kW (1hp) 50Hz – 0,9kW (1,2hp) 60Hz
• Exhaust outlets diameter: 120 - 80 mm